| |
 |
|
 |
|
||
|
| Index of Product Information Leaflets | Print Page |
A NEW CONCEPT IN
LUBRICATION TECHNOLOGY
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
FUEL EFFICIENT SYSTEMS | |
|
Based
on the incredibly and highly concentrated F ZX
I `Heat Seeking' |
||
| • Reduce fuel
consumption by up to 20% • Extend engine life by up to 35% • Save up to 30p per gallon • Increase power by up to 10% • Reduce friction by up to 90% • High temperature protection for turbochargers • Increase oil life by up to 100% • Reduce component operating temperatures • Increase resistance to component wear • Reduced exhaust emissions • Reduced noise and vibration • Reduced maintenance and running costs |
• Manufactured solely in the UK under systems assessed to
BS5750/IS09002 • A monomolecular hydrocarbon surface modifier • NOT another oil or fuel additive - they merely act as carriers • NOT based on solids like PTFE or molybdenum disulphide • NOT formulated with resins, thickeners or congealing agents • Ideal in ANY metal to metal application that generates unwanted friction • Once treated, metal bearing life is massively extended - even run dry! • Can be used in most gearboxes, transmission components etc. • After initial treatment, can last for up to 24,000 miles! • One 60-second treatment could save YOUR engine from major damage • GUARANTEED to improve your engine -or your money back in full! |
|
|
DRIVE, CLEANER, QUIETER,
FURTHER, FASTER ON EVERY |
||
| F
ZX I
is a very special in concept and different from oil additives. It
represents a major development in lubricant
technology and metal treatment. F ZX I is not just another oil or oil additive, it is quite different as it actually reacts with metal surfaces and produces an ultra hard wearing surface with an extremely low co-efficient of friction. It surpasses the film strength and wear reducing properties of any oil or oil additive on the market - even the synthetics. As turbocharger specialists for many years, we know how vital these properties are to prevent wear, reduce engine running temperatures and prevent seizure and subsequent engine damage, this is why we recommend F ZX I for your engine, transmission or any situation where there is metal to metal friction. |
||
|
|
How it works | |
|
Formula F ZX1's unique
formula, developed and made in Britain, is based on purely liquid
synthetic Polaron F ZX 1 molecules which CLEAN
as they CONDITION vital moving parts.
The special molecules are strongly polarised to metals. Carried in oils or fuels, Formula F ZX I penetrates surfaces, displaces existing contaminants and generates a super smooth organic layer THINNER than oil film yet TOUGHER than hardened steel. Once it is keyed onto metals, the micro layer cannot be sheared off or evaporated and is virtually indestructible. |
||
|
PROVEN BENEFITS |
||
| Why your engine needs Formula F ZX I | ||
|
Automotive experts agree that most engine wear occurs every time you
start your car's engine, before oil has fully circulated. In these
critical moments F ZX 1's
bonded film will protect bearings, cams, cylinder walls, pistons, pumps,
valve assemblies and other active
components. It will go on working up to extreme pressures and
temperatures, exceeding the limits of lubricating oils or fuel
additives. |
||
| Total engine treatment | ||
| It is
a metal treatment, NOT AN ADDITIVE. Application takes just seconds and
achieves superior wear protection and power release throughout the
system. Its combined detergent action cleans fuel injectors and removes
harmful deposits. F ZX I contains no PTFE, other solids, thickeners or
hazardous chemicals. It far exceeds all internationally recognised
standards of lubrication performance, and can safely be used in any
road-going static or marine engine. As preventative maintenance, the
treatment can dramatically reduce frictional wear and optimise peak
engine efficiency. One 200ml application treats up to 5 litres of lubricant and gives protection for 25,000 miles in vehicle engines. |
||
| Guarantee | ||
|
Guaranteed to improve engine or machine operating performance and extend
its life. 60 day money back guarantee. Remember - one simple 60 second application costs only £12.95 and can save you up to £250 per year in fuel savings, in addition to the wide range of other benefits. |
||
|
This all British' product has a NATO stock
listing and is separately warranted with Lloyds of London Indemnity. |
||
|
ORDER FORM |
|||
| FORMULA F ZX I -EACH | £ | QTY | |
| 200m1 | £12.00 | ||
| 400m1 | £22.00 | ||
| I Litre | £48.00 | ||
| Post & Packing Add | £1.25 for 200m1 | ||
| £1.50 for 400m1 | P&P | ||
| £3.00 for I Litre | TOTAL | ||
| TRADE PRICE LIST AVAILABLE | Please make cheques payable to Allard EFS | ||
A wealth of highly detailed
test and accreditation data commissioned by the manufacturer in the original
FXI formulation is available
and includes research carried out by the DTI
Warren Spring Laboratory. AEA National Centre for Tirbology, B.I.C.E.R.I.
Ltd., and Associated Octel Company Ltd.
| All Prices exclude VAT If you need more information: telephone, fax , e-mall us or visit our website. |
E-mail: Allard@AllardTurboSport.co.uk
Tel/Fax: 01600 772527
www.AllardTurboSport.co.uk Enquire, Order, Payments page NB. Prices Subject to change without prior notification, plus VAT at 17.5% and Post and Packing. All material © 2000 - 2007 Allard Turbo Sport. Web Design By M G Computers Email Webmaster |